One of the problems you may spot on your back yard garden or landscape area is stagnant water that gathers on the same area. This can lead to a lot of problem like is can be a breeding ground for mosquitoes or just simply annoying to look at, it breaks the beauty of the garden. French drain installation in Raleigh NC is the perfect solution for this kind of trouble.

There are various kinds of French drain available for your specific needs, but we will focus on draining system that is tasked to address excessive water in the yard. This is ideal especially if your place is located in lower slopes of an area where rain flows tends to go.

It is best to install this drainage system to avoid any problems that comes along with the rain like flood and stagnant water. Here are some basin tips on how to make your own flowing system that will solve your problems. Before starting the project is recommended to check for existing building codes and regulation in your residence.

Inform local authority or ask permission from the home owners association to make sure that what you are planning to do is legal. This is necessary to prevent any issues regarding the building of this system that can hinder or stop the project from progressing. Since, it is illegal to put youre your run off on other sewage system other establishments.

If everything goes according to plan and you are granted permission to start the job. The first thing you need to do is to make some preparation. Get all the tools and materials that you need such as shovel, utility knife, gloves, line level, measuring tools, and hammer you will also need to have woods, broken granites, landscape fabric and staples and pvc pipes.

After preparing the tools and materials needed, next thing you need to do is to assess the location. Locate the parts on your garden where the problem usually occurs, to be able to know where you will set up your drainage structure. Find out where is the best place to establish the outflow of your trench, make sure that the place is suitable for the project.

Then start digging the surface for the trench. Make the dug angled in a certain degree so that the flow will run smoothly without a problem. Check if the slope is appropriate for the overflow, make a careful plan to avoid any unnecessary trouble, you do not want to work on a back job.

After it is done line the gutter with a weed barrier or a landscape fabric. Applying this will let the liquid pass through the gutter with ease. Use staple to hold the fabric down in the line, make sure that it is properly installed.

Disperse crumbled granite or drainage rock at the base of the sewer. Distribute it evenly across the area, you can cut excess fabric using scissors or utility knife. You can now drill holes on the pipes in linear position, you are almost done.

Rest the PVC in the middle of the sewer, make sure that the holes are facing below the rocks. You can now cover the pipe line with the cut excess weed barrier, you may not cut the fabric if you want. Cover the gutter with stones and pebbles or you can even put grass on it depending on what you want and you are done the problem is solved.